With M.U.T.-III SE- Erase self-diagnostic results for “ALL MODE AWD/4WD”.
- Turn the ignition switch OFF, and wait for 10 seconds or more.
- Turn the ignition switch ON, and wait for 15 seconds or more.
- Perform self-diagnosis for “ALL MODE AWD/4WD”.
Is DTC “C1201-4B” detected?
INSPECTION END![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
Replace actuator assembly due to the malfunction of the AWD control unit. Refer to Disassembly and Assembly
.