[Previous][Next]
Component Inspection
1.CHECK TRANSFER OIL TEMPERATURE SENSOR
  1. Turn the ignition switch OFF.
  2. Remove transfer oil temperature sensor. Refer to Removal and Installation.
  3. Check the resistance between transfer oil temperature sensor connector terminals.
    • Make measuring condition using burning hot water.
    caution
    • Prevent a burn from the burning hot water.
    • Be sure to dry the sensor after checking.
    Transfer oil temperature sensorConditionResistance
    (Approx.)
    Terminal
    12100°C (212°F) 5.563 – 6.997 kΩ
Is the inspection result normal?
INSPECTION END
Replace transfer oil temperature sensor. Refer to Removal and Installation.