DTC Diagnosis Procedure
1.
CHECK DTC
Check that DTC UXXXX is not displayed.
Is the inspection result normal?
.
Perform trouble diagnosis for DTC UXXXX.
2.
CHECK COMBINATION METER FUNCTION
Check combination meter function. Refer to M.U.T.-III SE Function
CONSULT Function
(FULL TFT METER) or M.U.T.-III SE Function
CONSULT Function
(7 INCH INFORMATION DISPLAY).
Is the inspection result normal?
.
Repair or replace.
3.
CHECK INTERMITTENT INCIDENT
Check intermittent incident. Refer to Intermittent Incident
Intermittent Incident
.
Is the inspection result normal?
Replace combination meter. Refer to
Removal and Installation
(FULL TFT METER) or
Removal and Installation
(7 INCH INFORMATION DISPLAY).
Repair or replace error-detected parts.