[Previous][Next]
M.U.T.-III SE Function
 
 
APPLICATION ITEMS
M.U.T.-III SE can perform the following diagnosis modes via CAN communication and the combination meter.
Diagnosis modeDescription
Self Diagnostic ResultDisplay DTC which combination meter memorizes.
Data ListDisplays combination meter input/output data in real time.
Work SupportDisplays combination meter part number.
Warning HistoryLighting history of the warning light and indicator light can be checked.
ConfigurationThe vehicle specification can be written when combination meter is replaced
 
 
SELF DIAG RESULT
Refer to DTC Index.
 
 
Freeze frame data (FFD)
When DTC is detected, the following vehicle condition is recorded and it is displayed on the M.U.T.-III SE screen.
Item nameDisplay item
ODO/TRIP METERRecords an odometer value when DTC is detected.
  • Current odometer value is shown when the displayed DTC means a present malfunction.
  • Odometer value of the time of returning to normal is shown when the displayed DTC means a past malfunction.
DTC countRecords the number of times DTC was detected.
 
 
DATA MONITOR
noteThe following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to M.U.T.-III SE display items.
 
 
Display Item List
X: Applicable
Display item [Unit]MAIN
SIGNALS
Description
SPEED METER
[km/h]
XValue of vehicle speed signal received from ECM via CAN communication.
note655.35 is displayed when the malfunction signal is received.
SPEED OUTPUT
[km/h]
XVehicle speed signal value transmitted to other units via CAN communication.
note655.35 is displayed when the malfunction signal is received.
ODO OUTPUT
[km/h]
Odometer signal received from ABS actuator and electric unit (control unit) via CAN communication.
TACHO METER
[rpm]
XValue of the engine speed signal received from ECM via CAN communication.
note8191.875 is displayed when the malfunction signal is received.
FUEL METER
[L]
XFuel level indicated on combination meter.
W TEMP METER
[°C]
XValue of engine coolant temperature signal is received from ECM via CAN communication.
note215 is displayed when the malfunction signal is input.
ABS W/L
[On/Off]
Status of ABS warning light detected from ABS warning light signal is received from ABS actuator and electric unit (control unit) via CAN communication.
ASC/TCS IND
[On/Off]
Status of ASC OFF indicator light detected from ASC OFF indicator light signal is received from ABS actuator and electric unit (control unit) via CAN communication.
SLIP IND
[On/Off]
Status of ASC warning light detected from ASC warning light signal received from ABS actuator and electric unit (control unit) via CAN communication.
BRAKE W/L
[On/Off]
Status of brake warning light detected from brake warning light signal is received from ABS actuator and electric unit (control unit) via CAN communication and brake fluid level switch signal from brake fluid level switch.
noteDisplays “Off” if the brake warning light is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.
E-PKB warning light
[On/Off]
Status of electric parking brake warning light detected from electric parking brake warning light signal from electric parking brake control module via CAN communication.
DOOR W/L
[On/Off]
Status of door open warning detected from door switch signal received from BCM via CAN communication.
TRUNK/GLAS-H
[Off]
noteThis item is displayed, but cannot be monitored.
HI-BEAM IND
[On/Off]
Status of high beam indicator light detected from high beam request signal is received from BCM via CAN communication.
TURN IND
[On/Off]
Status of turn signal indicator light detected from turn indicator signal is received from BCM via CAN communication.
FR FOG IND
[On/Off]
Status of front fog light indicator light detected from front fog light request signal is received from BCM via CAN communication.
RR FOG IND
[Off]
noteThis item is displayed, but cannot be monitored.
LIGHT IND
[On/Off]
Status of position light indicator light detected from position light request signal is received from BCM via CAN communication.
OIL W/L
[On/Off]
Status of engine oil pressure warning detected from engine oil pressure warning light signal is received from ECM via CAN communication.
MIL
[On/Off]
Status of malfunction indicator light detected from malfunctioning indicator signal is received from ECM via CAN communication.
GLOW IND
[Off]
noteThis item is displayed, but cannot be monitored.
C-ENG2 W/L
[Off]
noteThis item is displayed, but cannot be monitored.
CRUISE IND
[Off]
noteThis item is displayed, but cannot be monitored.
SET IND
[Off]
noteThis item is displayed, but cannot be monitored.
CRUISE W/L
[Off]
noteThis item is displayed, but cannot be monitored.
BA W/L
[On/Off]
Status of AEB warning light judged from AEB warning light signal received from ADAS control unit via CAN communication.
ATC/T-AMT W/L
[Off]
noteThis item is displayed, but cannot be monitored.
ATF TEMP W/L
[Off]
noteThis item is displayed, but cannot be monitored.
CVT IND
[Off]
noteThis item is displayed, but cannot be monitored.
4WD W/L
[Off]
noteThis item is displayed, but cannot be monitored.
4WD LOCK IND
[Off]
noteThis item is displayed, but cannot be monitored.
FUEL W/L
[On/Off]
Low fuel warning status detected by the identified fuel level.
WASHER W/L
[On/Off]
Status of low washer fluid warning judged from washer level switch input to combination meter.
AIR PRES W/L
[On/Off]
Status of low tire pressure warning light judged from low tire pressure light signal received from BCM via CAN communication.
KEY G/Y W/L
[On/Off]
Status of Keyless operation key system malfunction detected from meter display signal is received from BCM via CAN communication.
KEY R W/L
[On/Off]
Status of Keyless operation key system malfunction detected from meter display signal is received from BCM via CAN communication.
KEY KNOB W/L
[On/Off]
Status of Keyless operation key system malfunction detected from meter display signal is received from BCM via CAN communication.
EPS W/L
[On/Off]
Status of power steering warning light detected from power steering warning light signal is received from EPS control unit via CAN communication.
e-4WD W/L
[Off]
noteThis item is displayed, but cannot be monitored.
AFS OFF IND
[Off]
noteThis item is displayed, but cannot be monitored.
4WAS/RAS W/L
[Off]
noteThis item is displayed, but cannot be monitored.
DDS W/L
[Off]
noteThis item is displayed, but cannot be monitored.
LANE W/L
[Off]
noteThis item is displayed, but cannot be monitored.
LDP IND
[Off]
noteThis item is displayed, but cannot be monitored.
SLOW IND
[Off]
noteThis item is displayed, but cannot be monitored.
READY IND
[Off]
noteThis item is displayed, but cannot be monitored.
INVT TEMP IND
[Off]
noteThis item is displayed, but cannot be monitored.
SYS FAIL W/L
[Off]
noteThis item is displayed, but cannot be monitored.
SFT POSI W/L
[Off]
noteThis item is displayed, but cannot be monitored.
HV BAT W/L
[Off]
noteThis item is displayed, but cannot be monitored.
HEV BRAKE W/L
[Off]
noteThis item is displayed, but cannot be monitored.
SFT OPER W/L
[Off]
noteThis item is displayed, but cannot be monitored.
LANE KEEP W/L
[Off]
noteThis item is displayed, but cannot be monitored.
IDOL STOP IND
[Off]
noteThis item is displayed, but cannot be monitored.
CHAGE W/L
[On/Off]
Status of charge warning light judged from 12V battery charge warning light signal received from ECM via CAN communication.
4WD AUTO IND
[Off]
noteThis item is displayed, but cannot be monitored.
DPF W/L
[Off]
noteThis item is displayed, but cannot be monitored.
TRAILER IND
[Off]
noteThis item is displayed, but cannot be monitored.
ECO MODE IND
[On/Off]
Status of ECO drive indicator light judged from ECO drive indicator light signal received from ECM via CAN communication.
ATP W/L
[Off]
noteThis item is displayed, but cannot be monitored.
E-SUS IND
[Off]
noteThis item is displayed, but cannot be monitored.
DCA IND
[Off]
noteThis item is displayed, but cannot be monitored.
MT SYNC REV IND
[Off]
noteThis item is displayed, but cannot be monitored.
FILTER W/L
[Off]
noteThis item is displayed, but cannot be monitored.
Urea remaining W/L
[Off]
noteThis item is displayed, but cannot be monitored.
ACC TARGET
[On/Off]
Status of vehicle ahead detection indicator judged from meter display signal received from ADAS control unit via CAN communication.
ACC DISTANCE
[Off, SHORT, Mid, LONG]
Status of set distance indicator judged from meter display signal received from ADAS control unit via CAN communication.
ACC SET SPEED
[km/h/Off]
Status of set vehicle speed indicator judged from meter display signal received from ADAS control unit via CAN communication.
ACC UNIT
[On/Off]
Status of display unit judged from meter display signal received from ADAS control unit via CAN communication.
SHIFT IND
[P, R, N, D, S, L, B, 1–6, M1–M8, A1–A6]
Status of shift position indicator judged from shift position signal received from TCM with CAN communication line.
GEAR SHIFT IND
[Off]
noteThis item is displayed, but cannot be monitored.
4WD IND
[AUTO]
noteThis item is displayed, but cannot be monitored.
OFFLOAD IND
[Off]
noteThis item is displayed, but cannot be monitored.
ECO DRIVE IND G
[Off]
noteThis item is displayed, but cannot be monitored.
ECO DRIVE IND O
[Off]
noteThis item is displayed, but cannot be monitored.
BSW IND
[Off]
noteThis item is displayed, but cannot be monitored.
DRIVE MODE STATS
[Off]
noteThis item is displayed, but cannot be monitored.
SCR/OIL DISP
[Off]
noteThis item is displayed, but cannot be monitored.
TOW MODE IND
[Off]
noteThis item is displayed, but cannot be monitored.
CHECK SUS IND
[Off]
noteThis item is displayed, but cannot be monitored.
FUEL CAP W/L
[On/Off]
Status of fuel filler cap warning display detected from fuel filler cap warning display signal received from ECM via CAN communication.
E-PKB indicator
[On/Off]
Status of electric parking brake indicator light detected from electric parking brake indicator light signal from electric parking brake control module via CAN communication.
PNP P SW
[Off]
noteThis item is displayed, but cannot be monitored.
PNP N SW
[Off]
noteThis item is displayed, but cannot be monitored.
O/D OFF SW
[On/Off]
Status of SPORT mode switch.
RANGE 1
[Off]
noteThis item is displayed, but cannot be monitored.
AT S MODE SW
[Off]
noteThis item is displayed, but cannot be monitored.
AT P MODE SW
[Off]
noteThis item is displayed, but cannot be monitored.
M RANGE SW
[On/Off]
Status of manual mode switch.
NM RANGE SW
[On/Off]
Status of non-manual mode switch.
AT SFT UP SW
[On/Off]
Status of manual mode shift up switch.
AT SFT DWN SW
[On/Off]
Status of manual mode shift down switch.
ST SFT UP SW
[Off]
noteThis item is displayed, but cannot be monitored.
ST SFT DWN SW
[Off]
noteThis item is displayed, but cannot be monitored.
AIR COND SIG
[Off]
noteThis item is displayed, but cannot be monitored.
HEATER FAN SW
[Off]
noteThis item is displayed, but cannot be monitored.
REAR DEF SW
[Off]
noteThis item is displayed, but cannot be monitored.
A/C LOW TEMP
[Off]
noteThis item is displayed, but cannot be monitored.
COMP F/B SIG
[Off]
noteThis item is displayed, but cannot be monitored.
4WD LOCK SW
[Off]
noteThis item is displayed, but cannot be monitored.
SYNC MODE
[Off]
noteThis item is displayed, but cannot be monitored.
PKB SW
[On/Off]
Status of parking brake switch.
BUCKLE SW
[On/Off]
Status of front seat belt buckle switch (driver side).
BRAKE OIL SW
[On/Off]
Status of brake fluid level switch.
AIR BAG SIG
[On/Off]
Status of SRS air bag warning light signal received from air bag diagnosis sensor unit via CAN communication.
CHG SIG
[On/Off]
Status 12V battery charge warning light signal received from ECM via CAN communication.
RR COMB STATE
[Off]
noteThis item is displayed, but cannot be monitored.
ABS EXIST
[Off]
noteThis item is displayed, but cannot be monitored.
ASC/TCS EXIST
[Off]
noteThis item is displayed, but cannot be monitored.
AMB POWER
[Off]
noteThis item is displayed, but cannot be monitored.
MODE A SW
[Off]
noteThis item is displayed, but cannot be monitored.
MODE B SW
[Off]
noteThis item is displayed, but cannot be monitored.
MT SYNC REV SW
[Off]
noteThis item is displayed, but cannot be monitored.
PASS BUCKLE SW
[On/Off]
Status of passenger seat belt buckle switch.
TOW MODE SW
[Off]
noteThis item is displayed, but cannot be monitored.
ECO MODE SW
[On/Off]
Status of ECO mode switch.
SPORT MODE SW
[On/Off]
Status of SPORT mode switch.
Electric shift W/L (red)
[On/Off]
Status of electric shift warning light (red) detected from electric shift warning light signal received from electric shift control module via CAN communication.
LED LMP R OPEN
[On/Off]
Status of front combination light RH judged based on headlight warning signal input from IPDM E/R via CAN communication.
LED LMP L OPEN
[On/Off]
Status of front combination light LH judged based on headlight warning signal input from IPDM E/R via CAN communication.
DISTANCE
[km]
Value of distance to empty calculated by combination meter.
OUTSIDE TEMP
[°C]
Ambient temperature value converted from ambient sensor signal received from ambient sensor.
noteThis may not match with the temperature value indicated on the information display. (Because the information display value is a corrected value from the ambient sensor input value.)
FUEL LOW SIG
[On/Off]
Low fuel warning status detected by the identified fuel level.
CRANKING SIG
[On/Off]
Cranking status is displayed.
ST CNT SIG
[On/Off]
Starter control status judged from starter control status signal is received from BCM via CAN communication.
DOOR LOCK SIG
[On/Off]
Status of door lock switch.
DR DOOR SIG
[LHD/RHD]
Status of driver side door.
BUZZER
[On/Off]
XBuzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter.
BATTERY CIRCUIT STATUS
[NORMAL/OPEN]
Status of fuse for shipping mode from shipping mode status signal received from BCM via CAN communication.
PARKING ASSIST DSP
[On/Off]
Status of sonar display received from sonar control unit via CAN communication.
PARKING ASSIST SENSOR
[Off/Rear/FRONT/On/Not support]
Activation status of sonar system received from sonar control unit via CAN communication.
PARKING ASSIST VOLUME
[High/Medium/Low/Not support]
Status of sonar volume received from sonar control unit via CAN communication.
PARKING ASSIST RANGE
[Far/Medium/Near/Not support]
Status of sonar range received from sonar control unit via CAN communication.
RAB W/L
[On/Off]
Status of RAB warning light judged from RAB warning light signal received from ADAS control unit via CAN communication.
Electric shift W/L
[On/Off]
Status of electric shift warning light detected from electric shift warning light signal received from electric shift control module via CAN communication.
Sailing stop W/L
[Off]
noteThis item is displayed, but cannot be monitored.
ALL PWER MTER
[kw]
noteThis item is displayed, but cannot be monitored.
SOC METER
[%]
noteThis item is displayed, but cannot be monitored.
VOLTMETER
[V]
noteThis item is displayed, but cannot be monitored.
BRAKE PAD W/L
[V]
noteThis item is displayed, but cannot be monitored.
TPMS DISP
[On/Off]
Status of TPMS display received from BCM via CAN communication.
TIRE STATUS FR
[Off]
noteThis item is displayed, but cannot be monitored.
TIRE STATUS FL
[Off]
noteThis item is displayed, but cannot be monitored.
TIRE STATUS RR
[Off]
noteThis item is displayed, but cannot be monitored.
TIRE STATUS RL
[Off]
noteThis item is displayed, but cannot be monitored.
SONAR SET AVA
[Available/Unavailable]
Status of sonar setting of combination meter.
STRG SW INPUT
[SW1-SW12, NOT INPUT]
Status of steering switch.
STRG SW OUTPUT
[SW1-SW12, NOT OUTPUT]
Status of steering switch output signal.
Sonar set output
[NO SW ST, FEB Off, FEB On, LDW OFF, LDW ON, BSW OFF, BSW ON, P MV OFF, P MV ON, SONAR OFF, SONAR ON, P SEN OFF, P SEN ON, P SEN FRONT, P BUZ HIGH, P BUZ MED, P BUZ LOW, P RNG FAR, P RNG MED, P RNG NEAR]
Status of Driving Aids and Parking Aids set on the information display of the combination meter.
HI-BEAM ASST IND
[Off]
noteThis item is displayed, but cannot be monitored.
Multi Around Monitor display
[Off]
noteThis item is displayed, but cannot be monitored.
SONAR DET STATUS
[On/Off]
Activation status of sonar system received from sonar control unit via CAN communication.
SONAR WARN
[Off/DEACT/ERROR]
Status of parking sensor error detected from parking sensor error signal is received from sonar control unit via CAN communication.
SONAR DET DSP RC
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of center sensor rear detection obstacle from sonar control unit via CAN communication.
SONAR DET DSP AREA RC
[On/Off]
Activation status of center sensor rear judged from a sonar indicator signal received from the sonar control unit via CAN communication.
DIPPED BEAM IND
[Off]
noteThis item is displayed, but cannot be monitored.
SONAR DET DSP RL
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor rear LH detection obstacle from sonar control unit via CAN communication.
SONAR DET DSP AREA RL
[On/Off]
Activation status of corner sensor rear LH judged from a sonar indicator signal received from the sonar control unit via CAN communication.
SONAR DET DSP RR
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor rear RH detection obstacle from sonar control unit via CAN communication.
SONAR DET DSP AREA RR
[On/Off]
Activation status of corner sensor rear RH judged from a sonar indicator signal received from the sonar control unit via CAN communication.
SONAR DET DSP FC
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of center sensor front detection obstacle from sonar control unit via CAN communication.
SONAR DET DSP AREA FC
[On/Off]
Activation status of center sensor front judged from a sonar indicator signal received from the sonar control unit via CAN communication.
SONAR DET DSP FL
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor front LH detection obstacle from sonar control unit via CAN communication.
SONAR DET DSP AREA FL
[On/Off]
Activation status of corner sensor front LH judged from a sonar indicator signal received from the sonar control unit via CAN communication.
SONAR DET DSP FR
[LEVEL1/LEVEL2/LEVEL3/LEVEL4]
Status of corner sensor front RH detection obstacle from sonar control unit via CAN communication.
SONAR DET DSP AREA FR
[On/Off]
Activation status of corner sensor front RH judged from a sonar indicator signal received from the sonar control unit via CAN communication.
SONAR DIST DSP
[Off/stop/30cm/40cm/50cm/60cm]
Sonar of information display of sonar sensor detection distance from sonar control unit via CAN communication.
Engine Off timer
[0]
noteThis item is displayed, but cannot be monitored.
TRQ DSTRBT
[%]
noteThis item is displayed, but cannot be monitored.
LANE IND
[WARN ON/BLINK/On/Off]
Status of LANE display detected from meter display signal is received from ADAS control unit via CAN communication.
PFCW IND
[WARN ON/BLINK/On/Off]
Status of PFCW system display detected from meter display signal is received from ADAS control unit via CAN communication.
LDW IND
[WARN ON/BLINK/On/Off]
Status of LDW system display detected from meter display signal is received from ADAS control unit via CAN communication.
TPMS FLT TIRE
[On/Off]
Status of flat tire detected from tire pressure data signal is received from BCM via CAN communication.
TPMS PRESS L
[On/Off]
Status of tire pressure low from tire pressure data signal is received from BCM via CAN communication.
4WD CL TMP H
[Off]
noteThis item is displayed, but cannot be monitored.
4WD TIRE CHCK
[Off]
noteThis item is displayed, but cannot be monitored.
4WD SYS MALF
[Off]
noteThis item is displayed, but cannot be monitored.
E SUS MALF
[Off]
noteThis item is displayed, but cannot be monitored.
ABS MALF
[On/Off]
Status of ABS malfunction display.
ASC MALF
[On/Off]
Status of ASC malfunction display.
ENG SYS CHCK
[On/Off]
Status of engine warning display.
ASCD SYS MALF
[On/Off]
Status of ASCD malfunction display.
OVER-BOOST IND
[Off]
noteThis item is displayed, but cannot be monitored.
ASCD SPD BLNK
[On/Off]
Blinking status of ASCD set vehicle speed judged by the ASCD status signal received from ECM via CAN communication.
ASCD STATUS
[Off, SL On, SL sus, SL inhi, CC On, CC sus, CC inhi, N/A]
Status of ASCD status display judged by the ASCD status signal received from ECM via CAN communication.
ASCD REQ SPD
[km/h]
ASCD set vehicle speed value judged by the ASCD status signal received from ECM via CAN communication.
Urea remain
[Off]
noteThis item is displayed, but cannot be monitored.
E/O CHG TMNG
[0]
noteThis item is displayed, but cannot be monitored.
E/O CHG TMNG RST
[On/Off]
Resetting of a remaining distance to the engine oil change time.
Urea time
[0]
noteThis item is displayed, but cannot be monitored.
AT STOP START IND
[Off]
noteThis item is displayed, but cannot be monitored.
AT STOP START STS
[Off]
noteThis item is displayed, but cannot be monitored.
AT STOP START SW
[Off]
noteThis item is displayed, but cannot be monitored.
HILL HOLD WARNING
[Off]
noteThis item is displayed, but cannot be monitored.
ASSIST/CHARGE GAUGE
[%]
noteThis item is displayed, but cannot be monitored.
EV IND
[Off]
noteThis item is displayed, but cannot be monitored.
ACCEL GAUGE
[%]
noteThis item is displayed, but cannot be monitored.
REMAINING ENERGY GAUGE
[%]
noteThis item is displayed, but cannot be monitored.
ECO ACCEL POSITION
[%]
Status of ECO pedal guide display.
REGENERATIVE BRAKE TRQ
[%]
noteThis item is displayed, but cannot be monitored.
MECHANICAL BRAKE TRQ
[%]
noteThis item is displayed, but cannot be monitored.
ENERGY FLOW
[MODE8]
noteThis item is displayed, but cannot be monitored.
ECO DRIVE NAVI
[LEVEL 0 - 30]
Status of ECO pedal guide detected from ECO pedal guide signal received from ECM via CAN communication.
Target front vehicle
[On/Off/BLINK/IBA BLINK]
Status of target front vehicle display.
BCI
[Off]
noteThis item is displayed, but cannot be monitored.
BCI LEFT
[Off]
noteThis item is displayed, but cannot be monitored.
BCI RIGHT
[Off]
noteThis item is displayed, but cannot be monitored.
CRUISE READY IND
[Off]
noteThis item is displayed, but cannot be monitored.
Set Forward Emergency Brake
[On/Off/Not support]
Status of AEB system setting.
SET LDW
[On/Off/Not support]
Status of LDW system setting.
SET BSW
[On/Off/Not support]
Status of BSW system setting.
Set Lane timing
[Off]
noteThis item is displayed, but cannot be monitored.
SET BCI BRAKE RESUME
[Off]
noteThis item is displayed, but cannot be monitored.
SET DCA
[Not support]
noteThis item is displayed, but cannot be monitored.
SET LDP
[On/Off/Not support]
Status of i‐LI system setting.
SET DCA TIMING
[Not support]
noteThis item is displayed, but cannot be monitored.
SET RMOD
[Off]
noteThis item is displayed, but cannot be monitored.
SET BCI IGNITION STATUS
[Off]
noteThis item is displayed, but cannot be monitored.
SET IBA
[Not support]
noteThis item is displayed, but cannot be monitored.
MSS RADER DEACTIVATED
[Off]
noteThis item is displayed, but cannot be monitored.
CHASSIS CONTROL WARN
[On/Off]
Status of chassis control display (warning) from chassis control malfunction signal is received from chassis control module (with built in steering sensor) via CAN communication.
Set Direct Adaptive Steering
[Off]
noteThis item is displayed, but cannot be monitored.
Set Emergency Assist Pedal
[On/Off/Not support]
Status of EAPM setting.
Set No Entry
[Not support]
noteThis item is displayed, but cannot be monitored.
Set Traffic Sign Recognition (TSR)
[On/Off/Not support]
Status of TSR setting.
SIGNAL WARNING STATUS
[On/Off]
Status of signal warning.
HEV system state
[Off]
noteThis item is displayed, but cannot be monitored.
LOW LI-ION BAT CHG WARN
[Off]
noteThis item is displayed, but cannot be monitored.
VSP OFF IND
[Off]
noteThis item is displayed, but cannot be monitored.
TIRE PRESS FR
[kPa, kg/cm2 or Psi]
The data of front RH tire pressure from BCM via CAN communication.
TIRE PRESS FL
[kPa, kg/cm2 or Psi]
The data of front LH tire pressure from BCM via CAN communication.
TIRE PRESS RR
[kPa, kg/cm2 or Psi]
The data of rear RH tire pressure from BCM via CAN communication.
TIRE PRESS RL
[kPa, kg/cm2 or Psi]
The data of rear LH tire pressure from BCM via CAN communication.
BSW IND
[WARN ON/BLINK/On/Off]
Status of BSW system display detected from meter display signal is received from ADAS control unit via CAN communication.
IBA IND
[Off]
noteThis item is displayed, but cannot be monitored.
DCA IND
[Off]
noteThis item is displayed, but cannot be monitored.
LDP IND
[On/Off]
Status of LDP system display detected from meter display signal is received from ADAS control unit via CAN communication.
ABSA IND
[On/Off]
Status of ABSA system display detected from meter display signal is received from ADAS control unit via CAN communication.
STATUS CHECK DSP
[Off]
noteThis item is displayed, but cannot be monitored.
SET SPEED FLASHING
[Off]
noteThis item is displayed, but cannot be monitored.
MSS STATUS WARNING ERR
[Off]
noteThis item is displayed, but cannot be monitored.
MSS NO WARN SET
[Off]
noteThis item is displayed, but cannot be monitored.
MSS NO DYNAMIC SET
[Off]
noteThis item is displayed, but cannot be monitored.
PA display request
[Off]
noteThis item is displayed, but cannot be monitored.
Ack for PA
[Not PA]
noteThis item is displayed, but cannot be monitored.
Camera display request
[Off]
noteThis item is displayed, but cannot be monitored.
PA malfunction
[Off]
noteThis item is displayed, but cannot be monitored.
Steering SW output
[Off]
noteThis item is displayed, but cannot be monitored.
Status of call display
[On/Off]
Status of MI-PILOT Assist system display jump function setting detected from MI-PILOT Assist system status signal is received from ADAS control unit via CAN communication.
Lane detect
[On/Off]
Status of lane detection.
PP inst message
[Speed/Active 2/Active1/Standby/Off/No msg]
Status of MI-PILOT Assist system instruction message.
PP display status
[Stby/Stby P/Active/Active P/Free/Free H/Malf/Off]
Status of MI-PILOT Assist system display detected from MI-PILOT Assist system status signal is received from ADAS control unit via CAN communication.
Hand free status
[On/Off]
Status of hands free warning display.
PP cancel info
[No act/Speed/Target/PA/Obstacle/Weather/E-PKB/Seatbelt]
Status of MI-PILOT Assist system cancel information.
FEB status
[On/Off]
Status of AEB system function.
PP setting status
[Temp 1/Avail 1/Avail 2/Temp 2]
Status of MI-PILOT Assist system function detected from MI-PILOT Assist system status signal is received from ADAS control unit via CAN communication.
Vehicle distance
noteThis item is displayed, but cannot be monitored.
EAPM status
[On/Off/No spprt]
Status of EAPM setting.
Traffic sign
[Signal/No entry/stop/No msg]
Status of TSR display.
 
 
WORK SUPPORT
Function nameWork ItemDescription
ECU InformationThe combination meter part number is displayed.
 
 
ECU IDENTIFICATION
The combination meter part number is displayed.
 
 
WARNING HISTORY
  • Stores histories when warning/indicator light is turned on.
  • “WARNING HISTORY” indicates the “TIME” when the warning/ indicator light is turned on.
  • The “TIME” above is:
    • 0: The condition that the warning/indicator light has been turned on 1 or more times after starting the engine and waiting for 30 seconds.
    • 1 - 39: The number of times the engine was restarted after the 0 condition.
    • NO WARNING HISTORY: Stores NO (0) turning on history of warning/indicator light.
note
  • WARNING HISTORY is not stored for approximately 30 seconds after the engine starts.
  • Brake warning light does not store any history when the parking brake is applied or the brake fluid level gets low.
 
 
Display Item
Display itemDescription
ABS W/LLighting history of ABS warning light.
ASC/TCS INDLighting history of ASC OFF indicator light.
SLIP INDLighting history of ASC warning light.
BRAKE W/LLighting history of brake warning light.
OIL W/LLighting history of engine oil pressure warning light.
C-ENG W/LLighting history of malfunction indicator light (MIL).
BA W/LLighting history of AEB warning light.
AIR PRES W/LLighting history of low tire pressure warning light.
EPS W/LLighting history of electric power steering warning light.
CHAGE W/LLighting history of 12V battery charge warning light.
noteIn items displayed on the M.U.T.-III SE screen, only those listed in the above table are used.