[Previous][Next]
DTC Diagnosis Procedure
1.INSPECTION START
  1. Turn ignition switch ON and wait at least 1 second.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Repeat step 1 and 2 for 10 times.
  4. Erase DTC.
  5. Turn ignition switch OFF and wait at least 10 seconds
  6. Turn ignition switch ON.
  7. Check the DTC.
Is DTC erased?
INSPECTION END
.
 
2.REPLACE ECM
  1. Replace ECM. Refer to Removal & InstallationECM : Removal & Installation.
  2. Refer to Work Procedure.
: INSPECTION END