Diagnosis Procedure
1.
CHECK DIRECT FUEL INJECTOR
Check direct fuel injector. Refer to
Component Function Check
.
Is inspection result normal?
.
Repair or replace error-detected parts.
2.
PERFORM DTC CONFIRMATION PROCEDURE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Check 1st trip DTC.
Is the DTC displayed again?
Replace ECM. Refer to
ECM : Removal & Installation
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
. 
.
Repair or replace error-detected parts..Replace ECM. Refer to ECM : Removal & Installation. INSPECTION END