[Previous][Next]
Description
 
 
OUTLINE
 
 
When a DTC is stored in ECM
When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw.
*1:When the same malfunction is detected in two consecutive trips, MIL will illuminate.*2:MIL will turn off after vehicle is driven 3 times (driving pattern B) without any malfunctions.
 
 
When a DTC is not stored in ECM
The erasing method depends on a permanent DTC stored in ECM. Refer to the following table.
noteIf the applicable permanent DTC includes multiple groups, perform the procedure of Group B first. If the permanent DTC is not erased, perform the procedure of Group A.
×: Applicable —: Not applicable
Group*Perform “DTC CONFIRMATION PROCEDURE” for applicable DTCs.Driving patternReference
BD
A× Refer to Work Procedure (Group A).
B×× Refer to Work Procedure (Group B).
*: For group, refer to DTC Index.