Component Inspection
1.
CHECK THROTTLE CONTROL MOTOR
Turn ignition switch OFF.
Disconnect electric throttle control actuator harness connector.
Check the resistance between electric throttle control actuator terminals as per the following.
Electric throttle control actuator
Resistance
(Approx.)
Terminals
5
6
1 - 15 Ω [at 25°C (77°F)]
Is the inspection result normal?
INSPECTION END
Replace electric throttle control actuator. Refer to
Removal and Installation
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace electric throttle control actuator. Refer to Removal and Installation
.