[Previous][Next]
Component Inspection
1.CHECK STOP LIGHT SWITCH-1
  1. Turn ignition switch OFF.
  2. Disconnect stop light switch harness connector.
  3. Check the continuity between stop light switch terminals as per the following conditions.
    Stop light switchConditionContinuity
    +−
    Terminals
    43Brake pedalFully releasedExisted
    Slightly depressedNot existed
    12Brake pedalFully releasedNot existed
    Slightly depressedExisted
Is the inspection result normal?
INSPECTION END
.
 
2.CHECK STOP LIGHT SWITCH-2
  1. Adjust stop light switch installation. Refer to Inspection and Adjustment.
  2. Check the continuity between stop light switch terminals as per the following conditions.
    Stop light switchConditionContinuity
    +−
    Terminals
    4 3Brake pedalFully releasedExisted
    Slightly depressedNot existed
    12Brake pedalFully releasedNot existed
    Slightly depressedExisted
Is the inspection result normal?
INSPECTION END
Replace stop light switch. Refer to Exploded View.