[Previous][Next]
Component Inspection
1.CHECK INTAKE MANIFOLD TUNING VALVE ACTUATOR
  1. Turn ignition switch OFF.
  2. Disconnect intake manifold tuning valve actuator harness connector.
  3. Check the resistance between intake manifold tuning valve actuator terminals as per the following.
    Intake manifold tuning valve actuatorResistance
    (Approx.)
    +
    Terminals
    123 - 8 Ω [at 25°C (77°F)]
Is the inspection result normal?
INSPECTION END
Replace intake manifold assembly. Refer to Removal and Installation.