| Knock sensor | | Crankshaft position sensor | | O-ring |
| Piston rings | | Piston | | Snap ring |
| Connecting rod | | Thrust bearing | | Connecting rod bearing |
| Rear oil seal | | Signal plate | | Main bearing (upper) |
| Main bearing (lower) | | Crankshaft | | Ladder assembly |
| Oil jet | | Drain plug | | Cylinder block |
| : Comply with the assembly procedure when tightening. Refer to Disassembly and Assembly | | | | |
: N·m (kg-m, ft-lb) |
: N·m (kg-m, in-lb) |
: Always replace after every disassembly. |
: Should be lubricated with oil. |
: Sealing point |