[Previous][Next]
Exploded View
 
 
WITH ENGINE COVER MODELS
cautionNever remove or disassemble parts unless instructed as shown in the figure.
High pressure fuel pump insulatorHigh pressure fuel pumpHigh pressure fuel pump lifter
O-ringHigh pressure fuel tubeFuel feed hose
EVAP canister purge volume control solenoid valve bracket
Comply with the installation procedure when tightening. Refer to Removal and Installation.To centralized under-floor piping
To high pressure fuel rail
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
: Should be lubricated with oil.
, : Indicates that the parts is connected at points with same symbols in actual vehicle.
 
 
WITHOUT ENGINE COVER MODELS
cautionNever remove or disassemble parts unless instructed as shown in the figure.
High pressure fuel pump insulatorHigh pressure fuel pumpHigh pressure fuel pump lifter
O-ringHigh pressure fuel tubeFuel feed hose
BracketEVAP canister purge volume control solenoid valve bracket
Comply with the installation procedure when tightening. Refer to Removal and Installation.To centralized under-floor piping
To high pressure fuel rail
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
: Should be lubricated with oil.
, : Indicates that the parts is connected at points with same symbols in actual vehicle.