 | Manifold absolute pressure (MAP) sensor |  | O-ring |  | Intake manifold |
 | Intake manifold gasket |  | Intake port insulator |  | Intake port insulator gasket |
 | Stud bolt |  | Electric throttle control actuator gasket |  | Electric throttle control actuator |
 | Clamp |  | EVAP canister purge volume control solenoid valve hose 1 |  | EVAP canister purge volume control solenoid valve |
 | EVAP canister purge volume control solenoid valve bracket |  | EVAP canister purge volume control solenoid valve hose 2 |  | Vacuum delay valve assembly |
 | Comply with the assembly procedure when tightening. Refer to Removal and Installation |  | To rocker cover. Refer to Exploded View | | To air duct. Refer to Exploded View |
| To EVAP line (EVAP canister to EVAP canister purge volume control solenoid valve)Hydraulic Layout | | | | |
 | : N·m (kg-m, ft-lb) | | | | |
 | : N·m (kg-m, in-lb) | | | | |
 | : Always replace after every disassembly. |
, , : Indicates that the part is connected at points with same symbol in actual vehicle. |