Removal and Installation
REMOVAL
caution
When replacing chassis control module, configuration of chassis control module is required. Refer to
Description
.
1.
Remove the glove box. Refer to
Removal and Installation
.
2.
Remove the chassis control module harness connector
from chassis control module
.
3.
Remove the chassis control module
from bracket
.
caution
Never drop the chassis control module.
INSTALLATION
Note the following, install in the reverse order of removal.
When replacing the chassis control module, be sure to perform the configuration of chassis control module. Refer to
Description
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
from chassis control module 
.)
from bracket .)
.