Removal and Installation
REMOVAL
caution
Do not remove front camera unit bracket and front camera cover from windshield glass.
Front camera unit bracket and front camera cover must be replaced together with windshield glass as an assembly.
When replacing front camera unit, perform “ADDITIONAL SERVICE WHEN REPLACING FRONT CAMERA UNIT." Refer to
Work Procedure
.
1.
Remove front camera cover.
2.
Release the lock
as shown by the arrow in the figure and disconnect the harness connector from the front camera unit.
3.
Using a suitable tool, remove the claw
and remove the front camera unit
from the front camera unit bracket
.
INSTALLATION
Installation is in the reverse order of removal.
caution
Be sure to perform "ADDITIONAL SERVICE WHEN REPLACING FRONT CAMERA UNIT" when replacing front camera unit. Refer to
Work Procedure
.
Do not touch or shock front camera lens area or drop front camera unit.
Perform camera aiming every time the front camera unit is removed and installed. Refer to
Work Procedure
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
as shown by the arrow in the figure and disconnect the harness connector from the front camera unit.)
and remove the front camera unit from the front camera unit bracket 
.)
