[Previous][Next]
Diagnosis Procedure
1.CHECK DTC PRIORITY
If DTC U2140-57 is displayed with DTC U1327-52 or U1327-54, first perform the trouble diagnosis for DTC U1327-52 or U1327-54.
Is DTC U1327-52 or U1327-54 detected?
 
2.CHECK MAC DIAGNOSIS
With M.U.T.-III SE
Perform “MAC Diagnosis” mode of “CHASSIS CONTROL” using M.U.T.-III SE.
Is DTC U2152-57 detected with DTC U2140-57, U214F–57, and U2165–57 (with sonar control unit) at the same time?
(all DTC codes are detected at the same time)Replace the chassis control module. Refer to Removal and Installation.
 
3.CHECK NETWORK-DTC
With M.U.T.-III SE
Perform "CAN Diag".
Is the inspection result normal?
Contact Techline and report the vehicle condition.
Repair or replace root cause.