[Previous][Next]
Diagnosis Procedure
1.PERFORM THE SELF-DIAGNOSIS
  1. Erase all self-diagnosis results with M.U.T.-III SE.
  2. Perform “Read All DTCs” with M.U.T.-III SE.
  3. Check if the “U216E-87” is detected as the current malfunction in “Self Diagnostic Result” of “Side radar (Rear left)”.
Is “U216E-87” detected as the current malfunction?
-1 To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2 Confirmation after repair: INSPECTION END