[Previous][Next]
Removal and Installation
 
 
REMOVAL
cautionBefore replacing sonar control unit, perform “Read/Write Configuration” to save or print current vehicle specification. For details, refer to Description.
 
 
1. Remove the luggage rear plate. Refer to Removal and Installation.
2. Disconnect the harness connector.
3. Press the mounting pawls in the direction of the arrow in the figure, and then remove the sonar control unit from the vehicle.
 
 
INSTALLATION
Install in the reverse order of removal.
cautionBe sure to perform “Read/Write Configuration” when replacing sonar control unit. For details, refer to Description.