6. Apply protective tapes (A) on the body panel to protect it from damage.
7. Remove luggage rear plate fixing clips using a remover tool (A).
: Clip
8. Remove luggage rear plate fixing pawls according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove luggage rear plate.
: Pawl
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
Visually check the clips for deformation and damage during installation. Replace with new ones if necessary.
Check in advance that clips and pawls are accurately aligned with the portions on body panel, and then install by pressing in.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
.
.)
)
)
)