[Previous][Next]
Removal and Installation
 
 
REMOVAL
Pull up and remove engagement with body from weather-strip joint.
cautionNever pull strongly on power liftgate weather-strip.
 
 
INSTALLATION
 
 
1. Working from the upper section, align power liftgate weather-strip center mark with vehicle center position mark and install weather-strip onto the vehicle .
2. Align the seam of power liftgate weather-strip with the center of power liftgate striker , and then install weather-strip onto the vehicle.
3. Pull power liftgate weather-strip gently to ensure that there is no loose section.
cautionCheck that weather-strip fits tightly in each corner.