[Previous][Next]
DTC Description
 
 
DTC DETECTION LOGIC
DTC No. M.U.T.-III SE screen terms
(Trouble diagnosis content)
DTC detection condition
B1383-01 Steering angle sensor
(Steering angle sensor)
Diagnosis conditionWhen ignition switch is ON
Signal (terminal)Steering angle sensor signal (CAN communication signal)
ThresholdThe neutral position registration of the steering angle sensor can not finish
Diagnosis delay time1 second or more
 
 
POSSIBLE CAUSE
Neutral position adjustment of the steering angle sensor is incomplete
 
 
FAIL-SAFE
Predictive course line is not displayed.
 
 
CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With M.U.T.-III SE
  1. Turn ignition switch ON.
  2. Turn ignition switch OFF and wait for 4 minutes.
  3. Turn ignition switch ON and wait at least 1 minute or more.
  4. Select “Self Diagnostic Result” mode of “MULTI AV” using M.U.T.-III SE.
  5. Check DTC.
Is DTC B1383-01 detected?
Proceed to Diagnosis Procedure.
-1To check malfunction symptom before repair: Refer to Intermittent IncidentIntermittent Incident.
-2Confirmation after repair: INSPECTION END