Diagnosis Procedure
1.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform confirmation procedure again. Refer to
DTC Description
.
Is DTC B2E4C‐06 detected?
Replace TCU. Refer to
Removal & Installation
.
Refer to Intermittent Incident
Intermittent Incident
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Replace TCU. Refer to Removal & Installation.
Refer to Intermittent IncidentIntermittent Incident.