Diagnosis Procedure
1.
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC U2118-87 detected again?
Perform the trouble diagnosis for CAN communication system. Refer to
Trouble Diagnosis Flow Chart
.
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
INSPECTION END