Diagnosis Procedure
1.
CHECK USB CABLE CONNECTION
Turn ignition switch OFF.
Check the USB cable connection between AV control unit and front auxiliary input jack.
Is the inspection result normal?
.
Connect the USB cable connector correctly.
2.
PERFORM CONFIRMATION PROCEDURE AGAIN
With M.U.T.-III SE
Turn ignition switch ON.
Erase DTC.
Perform DTC confirmation procedure again. Refer to
DTC Description
.
Is DTC B132A–01 detected again?
Replace USB cable (between AV control unit and front auxiliary input jack).
Check the intermittent incident. Refer to Intermittent Incident
Intermittent Incident
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
Connect the USB cable connector correctly.
With M.U.T.-III SE.Replace USB cable (between AV control unit and front auxiliary input jack).Check the intermittent incident. Refer to Intermittent IncidentIntermittent Incident.