Removal & Installation
REMOVAL
caution
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to
Precautions for Removing Battery Terminal
.
1.
Remove center console assembly. Refer to
Removal and Installation
.
2.
Disconnect harness connector.
3.
Disengage mood light (center console) assembly fixing pawls using a remover tool (A), and then remove mood light (center console) assembly.
: Pawl
INSTALLATION
Install in the reverse order of removal.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
