Removal & Installation
REMOVAL
caution
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to
Precautions for Removing Battery Terminal
.
1.
Remove switch panel. Refer to
Removal and Installation
.
2.
Apply protective tape (A) on instrument lower panel center to protect it from damage.
3.
Disengage mood light (instrument panel center) fixing pawls using a remover tool (A).
: Pawl
4.
Disconnect harness connector, and then remove mood light (instrument panel center).
INSTALLATION
Install in the reverse order of removal.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
)
