[Previous][Next]
Component Inspection (Front Side Marker Light)
1.CHECK FRONT SIDE MARKER LIGHT
  1. Ignition switch OFF.
  2. Disconnect front combination light connector.
  3. Check resistance of front combination light terminals.
    Front combination lightResistance
    Terminal
    +–
    910Except 0 Ω
Is the inspection result normal?
INSPECTION END
.
 
2.CHECK FRONT SIDE MARKER LIGHT BULB SOCKET
  1. Remove front side marker light bulb.
  2. Check resistance of front combination light terminals.
    Front combination lightResistance
    Terminal
    +–
    910Except 0 Ω
Is the inspection result normal?
Replace the corresponding front side marker light bulb. Refer to Replacement.
Repair or replace the corresponding front side marker light bulb socket.