Replacement

caution

Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
After installing the bulb, install the bulb socket securely for watertightness.
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned OFF.
Never leave bulb out of light reflector for a long time because dust, moisture smoke, etc. may affect the performance of light. When replacing bulb, be sure to replace it with new one.

PARKING LIGHT

caution

Replacement of a single part is not possible due to the adoption of LED. For replacement, replace front combination light as a set. Refer to Removal and Installation

DAYTIME RUNNING LIGHT

caution

Replacement of a single part is not possible due to the adoption of LED. For replacement, replace front combination light as a set. Refer to Removal and Installation

FRONT TURN SIGNAL LIGHT (LED TYPE)

caution

Replacement of a single part is not possible due to the adoption of LED. For replacement, replace front combination light as a set. Refer to Removal and Installation

FRONT TURN SIGNAL LIGHT (BULB TYPE)

1. Rotate front turn signal light bulb socket counterclockwise and unlock it.

2. Remove front turn signal light bulb from front turn signal light bulb socket.

FRONT SIDE MARKER LIGHT

1. Rotate front side marker light bulb socket counterclockwise and unlock it.

2. Remove front side marker light bulb from front side marker light bulb socket.