[Previous][Next]
Removal and Installation
cautionDisconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
 
 
REMOVAL
 
 
1. Remove front fender protector. Refer to Removal and Installation.
2. Remove front fog light mounting bolt .
3. Disconnect front fog light harness connector , and then remove front fog light from front fog light bracket.
4. Remove front fog light bracket mounting bolts .
5. Disengage front fog light fixing harness clip and front bumper clip , and then remove front fog light bracket from front bumper fascia.
 
 
INSTALLATION
Note the following item, and then install in the reverse order of removal.
cautionAfter installation, perform aiming adjustment. Refer to Adjustment.