Removal and Installation
REMOVAL
1.
Remove rear wiper arm. Refer to
Removal and Installation
.
2.
Remove power liftgate trim. Refer to
Removal and Installation
.
3.
Disconnect rear wiper motor assembly harness connector
.
4.
Remove rear wiper motor mounting bolts
, and then remove rear wiper motor assembly from power liftgate panel.
caution
Never drop rear wiper motor or cause it to come into contact with other parts.
5.
Remove pivot seal from power liftgate window glass.
INSTALLATION
Install in the reverse order of removal.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
..
.)
, and then remove rear wiper motor assembly from power liftgate panel.)