Removal and Installation
REMOVAL
Remove power liftgate inner finisher. Refer to
Removal and Installation
.
Disconnect power liftgate opener switch connector.
Remove power liftgate opener switch grommet
using removal tool.
Remove power liftgate opener switch fixing pawls using removal tool (A), and then remove power liftgate opener switch
.
caution
Apply protective tape on the part to protect it from damage.
: Pawl
INSTALLATION
Install in the reverse order of removal.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
using removal tool.)
.)
