[Previous][Next]
Removal and Installation
 
 
REMOVAL
caution When replacing the Keyless operation key unit, always replace it with a new one. The functions controlled by the Keyless operation key unit does not operate properly in case of reuse of the Keyless operation key unit from another vehicle.
 
 
1. Remove the instrument pad B. Refer to Removal and Installation.
2. Remove the Keyless operation key unit fixing screws and then remove Keyless operation key unit .
 
 
INSTALLATION
Install in the reverse order of removal.
cautionBe sure to perform ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT when replacing Keyless operation key unit. Or not doing so, Keyless operation key unit control function does not operate normally. Refer to DescriptionDescription.