Removal and Installation
REMOVAL
1.
Remove rear bumper fascia. Refer to
Removal and Installation
.
2.
Disconnect hands free sensor harness connectors, and then remove hands free sensor upper and lower from rear bumper bracket.
3.
Remove hands free sensor control unit mounting bolts, and then remove hands free sensor control unit.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
caution
After installation, check door lock. Refer to
Inspection
.
Never confuse hands free sensor upper (white harness) and hands free sensor lower (yellow harness).
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.