Diagnosis Procedure
1.
PERFORM "REPROGRAMING"
With M.U.T.-III SE
Perform "ECU Reprograming".
Erase DTC.
Ignition switch OFF.
Ignition switch ON.
Check “Self Diagnostic Result” mode of “HANDS FREE MODULE” using M.U.T.-III SE.
Is DTC detected?
.
INSPECTION END
2.
REPLACE INTELLIGENT KEY UNIT
Replace Keyless operation key unit. Refer to
Removal and Installation
.
:
INSPECTION END
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
With M.U.T.-III SE
.
INSPECTION END.