[Previous][Next]
Diagnosis Procedure
1.CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 1
  1. Ignition switch ON.
  2. Check signal between Keyless operation key unit harness connector and ground using oscilloscope.
    (+)(–)ConditionSignal
    (Reference value)
    Keyless operation key unit
    ConnectorTerminal
    M18431GroundWhen the door request switch (front door RH or rear door RH) is operated with ignition switch ONWhen Keyless operation key is in the antenna detection area
    When Keyless operation key is not in the antenna detection area
    32When Keyless operation key is in the antenna detection area
    When Keyless operation key is not in the antenna detection area
Is the inspection result normal?
Replace Keyless operation key unit. Refer to Removal and Installation.
.
 
2.CHECK OUTSIDE KEY ANTENNA CIRCUIT
  1. Ignition switch OFF.
  2. Disconnect Keyless operation key unit connector and outside key antenna (rear door RH) connector.
  3. Check continuity between Keyless operation key unit harness connector and outside key antenna (rear door RH) connector.
    Keyless operation key unitOutside key antenna (rear door RH)Continuity
    ConnectorTerminalConnectorTerminal
    M18431D3082Existed
    321
  4. Check continuity between Keyless operation key unit harness connector and ground.
    Keyless operation key unitContinuity
    ConnectorTerminal
    M18431GroundNot existed
    32
Is the inspection result normal?
.
Repair or replace harness.
 
3.CHECK OUTSIDE KEY ANTENNA INPUT SIGNAL 2
  1. Replace outside key antenna (rear door RH). (New antenna or other antenna)
  2. Connect Keyless operation key unit connector and outside key antenna (rear door RH) connector.
  3. Ignition switch ON.
  4. Check signal between Keyless operation key unit harness connector and ground using oscilloscope.
    (+)(–)ConditionSignal
    (Reference value)
    Keyless operation key unit
    ConnectorTerminal
    M18431GroundWhen the door request switch (front door RH or rear door RH) is operated with ignition switch ONWhen Keyless operation key is in the antenna detection area
    When Keyless operation key is not in the antenna detection area
    32When Keyless operation key is in the antenna detection area
    When Keyless operation key is not in the antenna detection area
Is the inspection result normal?
Replace outside key antenna (rear door RH). Refer to Removal and Installation.
Replace Keyless operation key unit. Refer to Removal and Installation.