[Previous][Next]
Disassembly and Assembly
 
 
DISASSEMBLY
cautionWhen removing, always use a remover tool that is made of plastic to prevent damage to the parts.
 
 
1. Disengage seat cushion trim fixing clip by using remover tool (B) (passenger seat).
2. Remove outside and inside seat cushion finisher outer. Refer to Disassembly and Assembly.
3. Disengage seatback trim fixing retainers .
4. Disengage harness fixing seat cushion trim dual lock fasteners .
5. Disengage seat cushion trim fixing retainers .
6. Disengage seatback trim fixing retainer (with seat heater models).
7. Open seatback trim fixing fasteners (with seat heater models).
8. Disengage seatback trim fixing retainers (with seat heater models).
9. Disengage seatback heater harness and harness connector fixing clips (with seat heater models).
10. Disconnect seatback heater harness connector (with seat heater models).
11. Disconnect seat cushion heater harness connector (with seat heater models).
12. Disengage seat cushion trim fixing clips by using a remover tool (B) (passenger seat).
13. Disengage seat cushion trim fixing retainers , and then remove seat cushion pad and trim as a set.
  • Driver seat
  • Passenger seat
14. Remove hog rings, and then separate the seat cushion trim and pad.
cautionBefore performing separating operation, check the installation position of hog rings.
15. Remove seat cushion silencer.
16. Disengage seat harness fixing clips on seat cushion suspension, and then remove seat cushion suspension.
 
 
ASSEMBLY
Note the following items, and then assemble in the reverse order of disassembly.
caution
  • For hog ring that is removed or crimped unsuccessfully, fix it by using a new hog ring. (Never reuse hog ring.)
  • Always install the hog rings in position.