[Previous][Next]
Removal and Installation
cautionNever damage the body panel.
 
 
REMOVAL
 
 
1. Remove luggage side lower finisher. Refer to Removal and Installation.
2. Remove rear seat belt shoulder anchor bolt. Refer to Removal and Installation.
3. Remove luggage side upper finisher mounting bolt .
4. Disengage luggage side upper finisher fixing clips according to numerical order 1→4 indicated by arrows as shown in the figure.
: Clip
5. Disengage fixing metal clips according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove luggage side upper finisher.
: Metal clip
 
 
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
  • Visually check clips and metal clips for deformation and damage during installation. Replace with new ones if necessary.
  • Check in advance that clips and metal clips are accurately aligned with the portions on body panel, and then install by pressing in.