[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove glove box. Refer to Removal and Installation.
2. Disconnect A/C amp. harness connectors .
: Vehicle front
3. Remove fixing screw , and then slide A/C amp. in the direction indicated by arrow as shown in the figure and remove it.
: Vehicle front
 
 
INSTALLATION
Note the following item, and then install in the reverse order of removal.
caution
Be sure perform ADDITIONAL SERVICE WHEN REPLACING A/C AMP. when replacing A/C amp. Or not doing so, A/C amp. control function does not operate normally. Refer to Description.