[Previous][Next]
Rear Air Control
 
 
COMPONENT FUNCTION WITHIN SYSTEM
  • The rear air control is activated by LIN communication with the A/C amp., and can set the rear temperature.
  • The rear air conditioning operating status is indicated on the display located on the control.
 
 
INDIVIDUAL COMPONENT FUNCTION
  • The conditions that are set for the rear air control that is operated by temperature switch are transmitted to the A/C amp. via LIN communication.
  • The operating status of the air conditioner is transmitted from the A/C amp. via LIN communication.
 
 
COMPONENT OPERATION
  • The operation status of each switch is detected by the control and is transmitted as an operation signal to the A/C amp. via LIN communication.
  • The following switch specification control was adopted.
    • Temperature control : Push-return type
    noteRegarding the push switches : Refer to the following for the differences between push-lock types and push-return types.
    OperationPush-lock typePush-return type
    Switch ON operation
    Switch OFF operation
    Push-lock type
    • Switch ON operation: At the time of switch ON operation, the switch is pushed from the reference point to the pushed position , and the switch turns ON. When the switch is released from this position, the switch returns from the pushed position to the hold position , and the switch position is held there.
    • Switch OFF operation: At the time of the switch OFF operation, the switch is pushed from the hold position to the pushed position . When the switch is released from this position, the switch returns from the pushed position to the reference point , and the switch turns OFF.
    Push-return type
    • Switch ON operation: At the time of the switch ON operation, the switch is pushed from the reference point to the pushed position , and the switch turns ON. When the switch is released from this position, the switch returns from the pushed position to the reference point .
    • Switch OFF operation: At the time of the switch OFF operation, the switch is pushed from the reference point to the pushed position , and the switch turns OFF. When the switch is released from this position, the switch returns from the pushed position to the reference point .
  • For the name and function of each switch. Refer to Switch Name and Function.
 
 
COMPONENT PARTS LOCATION
The rear air control is installed to the console rear finisher.
Refer to Component Parts Location.