Diagnosis Procedure
1.
CHECK HEATED STEERING WHEEL RELAY CONTROL SIGNAL CIRCUIT FOR SHORT
Ignition switch OFF.
Remove heated steering wheel relay and disconnect A/C amp. connector.
Check voltage between A/C amp. harness connector and ground.
+
−
Voltage
(Approx.)
A/C amp.
Connector
Terminal
M55
56
Ground
0 V
Is the inspection result normal?
.
Repair harness or connector.
2.
CHECK HEATED STEERING WHEEL RELAY
Check heated steering wheel relay. Refer to
Component Inspection
.
Is the inspection result normal?
Replace A/C amp. Refer to
Removal and Installation
.
Replace heated steering wheel relay.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
. 
Repair harness or connector..Replace A/C amp. Refer to Removal and Installation.Replace heated steering wheel relay.