[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove center console assembly. Refer to Removal and Installation.
2. Disengage fixing pawls, and then remove rear floor duct 1.
: Pawl
3. Disengage rear floor duct 2 fixing clip using a remover tool (A).
4. Peel off front floor carpet to secure work space. Refer to Removal and Installation.
5. Disengage fixing pawls, and then remove rear floor duct 2.
: Pawl
6. Remove rear floor duct 3.
  • RH Side
    Remove fixing screw , and then remove rear floor duct 3 RH.
  • LH Side
    Disengage harness clip and remove fixing screw , and then remove rear floor duct 3 LH.
    : Harness clip
 
 
INSTALLATION
Install in the reverse order of removal.