Removal and Installation
REMOVAL
1.
Remove instrument panel assembly. Refer to
Removal and Installation
.
2.
Remove fixing screws
, and then remove side ventilation duct LH.
3.
Disengage harness clip and remove fixing screw
, and then remove side ventilation duct RH.
: Harness clip
INSTALLATION
Install in the reverse order of removal.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
, and then remove side ventilation duct LH.)
, and then remove side ventilation duct RH.)
