[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Turn the ignition switch ON.
cautionNever start the engine.
2. Release the parking brake.
cautionIf the brake cannot be released, release it manually. Refer to Diagnosis Procedure.
3. Turn the ignition switch OFF.
4. Disconnect 12V battery negative terminal. Refer to Exploded View.
5. Remove rear tires. Refer to Removal and InstallationRemoval & Installation.
6. Disconnect parking brake actuator harness and rear wheel sensor harness connectors.
7. Remove parking brake actuator harness and rear wheel sensor harness mounting bolts.
8. Remove parking brake actuator harness and rear wheel sensor harness from the vehicle.
 
 
INSTALLATION
Install the reverse order of the removal.