[Previous][Next]
Diagnosis Procedure
1.CHECK DTC PRIORITY
If DTC P2616 is displayed with DTC P0340, first perform the confirmation procedure (trouble diagnosis) for DTC P0340.
Is DTC P0340 detected?
Perform diagnosis of applicable. DTC Description
.
 
2.CHECK INTAKE CAMSHAFT POSITION (CMP) SENSOR SIGNAL CIRCUIT FOR ELECTRIC INTAKE VALVE TIMING CONTROL
  1. Turn ignition switch OFF.
  2. Disconnect ECM harness connector and electric intake valve timing control module harness connector.
  3. Check the continuity between ECM harness connector and electric intake valve timing control module harness connector.
    ECM Electric intake valve timing control moduleContinuity
    ConnectorTerminalConnectorTerminal
    F52127F9037Existed
  4. Also check harness for short to power and short to ground.
Is the inspection result normal?
INSPECTION END
Repair or replace error-detected parts.