Component Inspection
1.
CHECK FUEL PUMP
Turn ignition switch OFF.
Disconnect “fuel level sensor unit and fuel pump” harness connector.
Check resistance between “fuel level sensor unit and fuel pump” terminals as follows.
Fuel level sensor unit and fuel pump
Resistance
+
-
Terminal
1
4
0.2 - 5.0Ω [at 25°C (77°F)]
Is the inspection result normal?
INSPECTION END
Replace “fuel level sensor unit and fuel pump”. Refer to Removal & Installation
Removal and Installation
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
INSPECTION END
Replace “fuel level sensor unit and fuel pump”. Refer to Removal & InstallationRemoval and Installation
.