[Previous][Next]
DIAGNOSTIC TROUBLE CODE CHART
cautionDuring troubleshooting, a DTC associated with other systems may be set when the ignition switch is turned "ON" with connector(s) disconnected. On the completion of troubleshooting, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
DTC No.Diagnostic itemReference page
B1083EEPROM fail
U0141ETACS CAN timeout
U1190Not receive fault detect signal
U1F50CAN1 Bus-off
U1F51CAN2 Bus-off
U1F52CAN3Bus-off