[Previous][Next]
Inspection Procedure 9: The hands-free cellular phone system does not operate normally.
 
 
cautionBefore replacing the multivision display, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
 
 
TECHNICAL DESCRIPTION (COMMENT)
If a hands-free cellular phone system does not function correctly, a Bluetooth® device is not paired or the multivision display may be defective.
 
 
TROUBLESHOOTING HINTS
  • The multivision display may be defective
  • Pairing with the Bluetooth® device has not been completed.
  • The Bluetooth® device is not supported.
 
 
DIAGNOSIS
STEP 1. Check whether the Bluetooth® device is supported.
Check whether the Bluetooth® device is supported.
noteSupported Bluetooth® devices are listed on the MITSUBISHI MOTORS web site.
Is the check result normal?
Go to Step 2.
Use the supported Bluetooth® device.
 
STEP 2. Reset the multivision display and check the trouble symptom.
(1)
caution
  • If the multivision display is reset, all the data stored by customer will disappear. Therefore, prior to the reset, the agreement of the customer should be obtained.
  • If the multivision display is reset, the guide line for the rear view camera will be initialized. In that case, readjust the guide line.
Reset the multivision display. (Refer to .)
(2) Carry out the necessary pairing for the Bluetooth® device. (Refer to .)
(3) Check whether the hands-free cellular phone system works normally.
Is the check result normal?
The diagnosis is complete.
Replace the multivision display (Refer to ).