54A-ACTUATOR TEST REFERENCE TABLE

[Previous]

[Next]

ACTUATOR TEST TABLE

ACTUATOR TEST

Item No.	Item name	Test item	Driven content
1^*	Speedometer	Pointer setting (-)	Value that is set with scan tool is shown on the combination meter.
2	Tachometer	Pointer setting (r/min)
3	Fuel gauge	Status setting (ohm)
5	Meter illumination	Status setting (%)
7	Indicator1	By turning ON/OFF the item values, indicators can be illuminated/extinguished and tone alarm can be sounded.	ON (illuminated)/OFF (extinguished)
8	Indicator2
9	Indicator3
10	Indicator4

note	^*: Depending on the main scale of the speedometer, the unit that can be tested changes. Unit is displayed as "-" on the scan tool screen.

TEST (SPECIAL FUNCTION)

Item No.	Item name	Test content
2	LCD(AUTO)	The multi information display screen changes by looping in the following order. A black full screen is displayed. The version information is displayed. A white full screen is displayed. A screen with black and white gradation is displayed.
3	Buzzer(AUTO)	The tone alarm sounds.