42A-CUSTOMIZATION FUNCTION

CUSTOMIZATION FUNCTION

By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.

Adjustment item (scan tool display)	Adjustment item	Adjusting contents (scan tool display)	Adjusting contents
Door unlock mode	Adjustment of power door locks with selective unlocking <Vehicles with keyless entry system>	All Doors Unlock	Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors.
Door unlock mode		Dr Door Unlock	With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition)
Auto door unlock	Adjustment of the auto door unlock function	Disable	Without function. (initial condition)
		Always (P pos)	With function: Operates when the shift lever or the selector lever is moved to the P position.
		Always (Lock pos)	With function: Operates when the ignition switch is moved to the LOCK (OFF) position.