[Previous][Next]
DISASSEMBLY AND ASSEMBLY
 
 
warningCertain components of this vehicle, such as coin-type lithium battery may contain perchlorate materials. Before deployment and/or disposal of these components, review and comply with all applicable Federal, state and local regulations.
cautionWhen disassembling the transmitter, static electricity may damage the internal electronic circuit. Therefore, be sure to release static electricity from your body before disassembling the transmitter.
Post-installation operation
  • Transmitter operation check
Disassembly steps
1.Screw
2.Cover assembly
<<A>>>>A<<3.Battery
4.Transmitter assembly
5.Button
6.Master key
 
 
DISASSEMBLY SERVICE POINT
 
 
<<A>> BATTERY REMOVAL
cautionDo not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
 
 
 
 
ASSEMBLY SERVICE POINT
 
 
>>A<< BATTERY INSTALLATION
cautionDo not allow water or dust to enter the inside of the transmitter assembly when it is open. Also, do not touch the precision electronic device.
Install a new battery to the transmitter assembly with its (+) side facing towards the cover assembly side.
Replacement battery: Coin-type lithium battery CR1620